Selection elements of tool bank
With the wide application of CNC in the parts processing industry in recent years, CNC with knife bank has set higher requirements for its tool changing speed, and the market demand for CNC with knife bank is increasing. Among them, straight-line knife bank is the most popular because of its low cost, simplicity and fast speed, and umbrella shape and bamboo hat type are also widely used.
For the horizontal machining center of CNC tool base, there are generally motors of tool base, cutter-chain, driving sprocket, cutter changing manipulator, mechanical arm driving hydraulic cylinder (or cylinder), protective plate gold, etc. No matter what tool base, the key lies in the capacity of tool storage and the time of tool changing.
The machining center is divided into turning machining center, boring and milling machining center, turning and milling complex center, as well as some other centers, such as grinding machining center, CNC stamping compound center, etc.
Horizontal machining center and vertical comparison, for machine tool manufacturing, the lathe bed unit, long stroke is compared commonly, often use B shaft can rotate (table), motor power, dao database is bigger also, (less the 32, multi-point hundreds), generally choose double workbench (change table, in order to improve the production efficiency and processing, while exchange Labour), used or more electrical components, and the control of CNC system for controlling the number of shaft, the machining accuracy requirement is high, so generally choose middle-grade system, to put it bluntly, machine tool, the greater the price is more expensive. (of course, must be under the same condition compares). The knot In terms of construction features, the major vertical axis is perpendicular to the horizontal, while horizontal horizontal is horizontal to horizontal.